As an Amazon Associate, I earn from qualifying purchases
If you own a 2017 Toyota Highlander, you’ve probably seen that maintenance light pop up on your dashboard. It’s a clear sign your vehicle is telling you it’s time for some care.
But once you’ve taken care of the service, how do you turn that light off? Resetting the maintenance light is easier than you think, and doing it yourself saves you time and money. In this guide, you’ll learn simple, step-by-step instructions to reset your Highlander’s maintenance light quickly.
Keep reading to get your dashboard back to normal and drive with confidence again.
Credit: www.toyotadm.com
Locate The Maintenance Light
Before resetting the maintenance light on a 2017 Toyota Highlander, find the light first. This step is important to know what to reset. The maintenance light shows on your dashboard. It tells you when your vehicle needs service.
Knowing where the maintenance light is helps you track your car’s condition. It keeps you aware of required maintenance tasks. This makes your Toyota run smoothly and safely.
Dashboard Indicators
The maintenance light is part of your dashboard indicators. It usually looks like a small wrench or a message that says “Maintenance Required.” The light appears near the speedometer or fuel gauge. It turns on after a certain number of miles. This alert helps remind you to check your car’s oil and other fluids.
Common Maintenance Alerts
Besides the maintenance light, your dashboard may show other alerts. These include oil change reminders, tire pressure warnings, and brake system notices. Each alert has a unique icon or message. Understanding these helps you keep your Highlander in top shape. Ignoring alerts can cause bigger problems later.
Prepare Your Vehicle
Start by turning the ignition on without starting the engine. Locate the trip meter reset button on the dashboard. Hold the button until the maintenance light blinks and turns off.
Turn Off The Engine
Start by turning off your 2017 Toyota Highlander’s engine. Make sure the vehicle is completely off. This step is crucial for resetting the maintenance light correctly. Keep the key in the “Off” position before moving to the next step.
Set The Odometer To Trip A
Next, locate the odometer display on your dashboard. Press the trip button until the screen shows “Trip A.” This setting is necessary to reset the maintenance light. Confirm that “Trip A” is visible before proceeding.
Reset Process Steps
Resetting the maintenance light on your 2017 Toyota Highlander is simple. Follow these clear steps to turn off the light after service. Each step is easy to do and takes only a few moments.
Press And Hold The Trip Meter Reset Button
Find the trip meter reset button on your dashboard. Press and hold this button firmly. Keep it pressed until the next step.
Turn The Ignition To On
While holding the button, turn the ignition key to the “On” position. Do not start the engine. Keep the button held down during this step.
Wait For The Light To Blink
The maintenance light will start to blink on the dashboard. This blinking means the system is resetting. Wait patiently until the blinking stops.
Release The Button
Once the light stops blinking, release the trip meter reset button. The maintenance light should now be off. Your Highlander is ready for the road.
Credit: www.youtube.com
Verify The Reset
After resetting the maintenance light on your 2017 Toyota Highlander, it is important to verify the reset. This step confirms that the light has turned off and the system recognizes the reset. Checking the light status helps avoid confusion and ensures your vehicle’s maintenance schedule is accurate.
Start The Engine
Turn the key to start the engine or press the start button. The dashboard will light up briefly, showing all warning lights. Watch the maintenance light closely as the system completes its checks. The light should turn off after a few seconds if the reset was successful.
Check For Light Status
Observe the maintenance light carefully on the dashboard. If the light stays off, the reset worked properly. If the light remains on or flashes, the reset did not complete. Repeat the reset process or consult your vehicle manual for further steps.
Troubleshooting Tips
Sometimes, resetting the maintenance light on a 2017 Toyota Highlander does not go as planned. Troubleshooting helps find and fix these problems fast. Follow these tips to solve common issues.
Light Doesn’t Reset
Check the steps carefully. The ignition must be off before starting the reset. Press the gas pedal fully for 10 seconds. If the light stays on, try the process again.
Look for a blown fuse in the fuse box. A bad fuse can stop the reset. Also, check if the battery is weak. Low battery power might cause errors.
Repeated Maintenance Alerts
The light may come back due to actual maintenance needs. Check the oil level and quality. Change the oil if it looks dirty.
Make sure the maintenance schedule is followed. The system triggers alerts based on mileage and time. If alerts repeat after a reset, visit a service center.
Credit: mitchell1.com
When To Reset The Maintenance Light
The maintenance light on your 2017 Toyota Highlander is a helpful reminder. It lets you know when the vehicle needs attention. Resetting this light at the right time keeps your car running well. It also ensures the light remains a useful signal for future service needs.
Knowing when to reset the maintenance light helps avoid confusion. Resetting too early or too late can cause problems. Below are key moments when you should reset the light to keep your Highlander in top shape.
After Oil Changes
The most common time to reset the maintenance light is after an oil change. Oil changes keep the engine clean and running smoothly. Once the oil is changed, the maintenance light should be reset. This clears the old service alert and prepares the system for the next interval.
Not resetting the light after an oil change may cause it to stay on. This can be distracting and may hide new issues. Resetting it ensures the light only comes on when your Highlander truly needs service.
Scheduled Maintenance Intervals
Your Toyota Highlander follows a maintenance schedule. This schedule is based on miles driven or time passed. At these set intervals, different checks and services are required.
Reset the maintenance light after completing these scheduled services. This includes inspections, fluid changes, tire rotations, and more. Resetting signals the system that the work is done. It also keeps the light ready for the next scheduled maintenance.
Frequently Asked Questions
How Do I Reset The Maintenance Light On A 2017 Highlander?
Turn the ignition to ON without starting. Press the odometer button until mileage shows. Hold the button until the light blinks and resets.
Why Does The Maintenance Light Stay On After Service?
The light stays on if not reset manually. Resetting clears the reminder after oil or service.
How Often Should I Reset The Maintenance Light?
Reset after every oil change or scheduled service. This keeps the reminder accurate and helpful.
Can I Reset The Maintenance Light Without Tools?
Yes, no tools needed. Use the odometer button and ignition switch only.
What If The Maintenance Light Doesn’t Reset?
Check if the button is held long enough. Try again or consult the owner’s manual.
Does Resetting The Maintenance Light Affect Vehicle Performance?
No, resetting only clears the reminder. It does not change how the vehicle works.
Conclusion
Resetting the maintenance light on your 2017 Toyota Highlander is simple. Follow the steps carefully to avoid confusion. This small task helps keep your vehicle running well. Regular resets remind you to perform needed services. Stay on top of maintenance for a safer drive.
Your Highlander will thank you with better performance. Try it today and see how easy it is. Taking care of your car keeps it reliable. No special tools are needed for this reset. Just a few minutes can save time later.
As an Amazon Associate, I earn from qualifying purchases
